Mediterranean Style House Plan - 5 Beds 6.5 Baths 7211 Sq/Ft Plan #929-900 (2024)

This report will provide you cost estimates based on location and building materials.

7211
sqft

5
Beds

6.5
Baths

3
Floors

2
Garages

This plan canbecustomized

Tell us about your desired changes so we can prepare an estimate for the design service. Click the button to submit your request for pricing, or call 1-800-528-8070 for assistance.

Depth : 135' 5"

Height : 64'

Width : 60'

First Floor: 3716 sq/ft height 12'

Garage: 3897 sq/ft

Patio: 1601 sq/ft

Second Floor: 2654 sq/ft height 12'

Third Floor: 841 sq/ft height 12'

* Total Square Footage typically only includes conditioned space and does not include garages, porches, bonus rooms, or decks.

Primary Pitch : 9:12

Roof Framing : Conventional

Roof Type : Concrete

Secondary Pitch : 5:12

Exterior Wall Finish : Stucco

Framing : Block

Fireplace

Formal Dining Room

Guest Suite

Main Floor Master Bedroom

Walk In Closet

Breakfast Nook

Kitchen Island

Kitchenette Wet Bar

Walk In Pantry Cabinet Pantry

Den Office Study Computer

Family Room Keeping Room

Great Room Living Room

Hobby Rec Room Game Room

Loft

Main Floor Laundry

Master Sitting Area

Open Floor Plan

Vaulted / Cathedral Ceilings

Balcony

Courtyard

Covered Front Porch

Covered Rear Porch

Deck

Grill Deck Sundeck

Outdoor Kitchen Grill

Bedroom 2:

width 12' 4" x depth 19' 2"

Bedroom 3:

width 12' 4" x depth 19' 2"

Bedroom 4:

width 13' 2" x depth 15' 10"

Bedroom 5:

width 13' 2" x depth 15' 10"

Breakfast Nook:

width 8' x depth 12'

Dining:

width 13' 6" x depth 15' 6"

Family Room:

width 17' 2" x depth 19' 2"

Foyer:

width 9' 4" x depth 11' 5"

Grand Room:

width 13' 4" x depth 25' 7"

Great Room:

width 19' x depth 24' 6"

Kitchen:

width 17' 4" x depth 15' 6"

Master Bedroom:

width 17' 2" x depth 17' 4"

Master Sitting:

width 9' 2" x depth 5'

Mechanical Room:

width 10' 6" x depth 9' 10"

Recreation Room:

width 19' x depth 27' 2"

Sitting:

width 11' 4" x depth 20'

Study:

width 13' 2" x depth 15' 10"

Summer Kitchen:

width 18' x depth 12' 2"

See a sample planset

• Cover Sheet - A rendering of the front exterior of the house.
• Foundation Plan - This plan gives the foundation layout, including support walls, excavated and unexcavated areas, if any, foundation notes and details, and floor framing.
• Detailed Floor Plans - These plans show the layout of each floor of the house. Rooms and interior spaces are carefully dimensioned and keys are given for cross-section details provided later in the plans, as well as window and door schedules. These plans may also show the location of kitchen appliances and plumbing fixtures, and may suggest locations for electrical fixtures, switches and outlets.
• Interior Elevations - The interior elevation drawings show a suggested layout design of cabinets, utility rooms, fireplaces, bookcases, built-in units and other special interior features depending on the nature and complexity of the item.
• Roof Plan - The roof plan shows a bird's eye view of the overall layout of the roof, ridges, valleys, and slopes.
• Door and window schedules - Sizes, quantities and descriptions of all doors and windows shown on the plan.
• Exterior Elevations - Included are front, rear, left and right sides of the house. Exterior materials, details and measurements are also given.
• Cross-Section / Wall Section Details - Important changes in floor, ceiling and roof heights or the relationship of one level to another are called out. Also shown, when applicable, are exterior details such as railing and banding.
• Structural Plan - Overall layout and necessary details for the ceiling, second-floor framing (if applicable) and roof construction. If trusses are used, it's suggested that you use a local truss manufacturer to design your trusses to comply with your local codes and regulations.
• Each plan is designed to be consistent with CABO One and Two Family Dwelling Code or the International Residential Code in effect at the time the plan was created. Modifications may be necessary to meet applicable building codes, ordinances, local climatic, and geographical design criteria. Consult a builder, architect or other construction professional as necessary. Manufacturer instructions should be followed for all materials, appliances, and systems. Heating/air conditioning layouts, plumbing pipe layouts, and electrical wiring layouts are not included. Consult a local mechanical contractor for systems suitable for local climate conditions.